Aastra 6735i User Manual page 151

The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable CFWD on the IP Phone.
Key LED Behavior for All Modes
CFWD key LED RED if any CFWD mode is enabled for the account in
focus.
CFWD key LED OFF if all CFWD modes are disabled for the account in
focus.
Note:
If you make changes to the configuration for CFWD via the IP Phone UI, you must refresh the Aastra Web UI screen to
see the changes.
Configuring CFWD Using the Aastra Web UI
Aastra Web UI
Use the following procedure to configure CFWD using the Aastra Web UI.
Note:
(Optional) You can configure a Call Forward key on your phone to access the Call Forward menus if desired. If you do
not configure a Call Forward key, you can still access the Call Forward menu from the IP Phone UI at the path, Options-
>Call Forward.
1. (optional) Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Call Forward from the list of options.
4. (optional) If required, enable or disable the applicable states for the Call Forward key (Idle, Connected, Incoming,
Outgoing, and/or Busy).
Programmable Keys
5. Select from "Key 1" through "Key 6".
6. In the "Type" field, select Call Forward from the list of options.
Expansion Module Keys
7. Select from "Key 1" through "Key 36" (M670i).
or
Select from "Key 1" through "Key 60" (M675i).
41-001451-05 REV01 – 04.2014
MWI LED Behavior for All Modes
MWI LED ON if any CFWD mode is enabled for the account in focus.
MWI LED OFF if all CFWD modes are disabled for the account in focus.
Managing Calls
145