Aastra 6735i User Manual page 122

Handling Calls
Transferring an Existing Call to Another Existing Call
1. Ensure you are on an active call with the party you wish to transfer (the transfer recipient should be placed on hold)
Press the 3 or 4 navigation keys to scroll to the party to whom you wish to transfer the active call.
2.
3. Press Xfer key.
The active call will be transferred.
Completing a Transfer to a Contact in Phone Directory
Users can complete a blind transfer to a contact in their local directory. If a user is in a call and initiates a transfer, they can
navigate to the Directory screen where a new transfer key can be pressed to complete a blind transfer. There is no
change to start a consultative call.
When a directory entry is shown, there is a Xfer softkey below the current Dial softkey to trigger a blind transfer. This
Xfer softkey is only available if a transfer has been initiated.
If a directory entry has multiple numbers, softkey 2 is used for the Arrange function. If a transfer has been initiated, the
Arrange function will be replaced with the Xfer function.
Dial
Xfer
Add New
To Transfer a Call to a Contact in the Phone Directory:
Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
1.
Press the Xfer key. You should hear a dial tone as a second line opens up.
2.
3. Press the Directory key and select a contact.
4. To complete a blind transfer, press the Transfer key again before the receiving end answers.
To complete a consultative transfer, press Dial to call the contact. Remain on the line to speak with Party
2 before pressing the Transfer key again to transfer Party 1 to Party 2.
To cancel the transfer, select Cancel on the display screen or press
116
Directory
1.John
2.Kim
3.Steve
4.Jane
Delete
Details
Quit
003 Steve
905-760-9999
Line 1
Dial Delete
Xfer Change
Add Number List
Entry has multiple numbers
.
41-001451-05 REV01 – 04.2014