Wireless Security: Wpa-Psk/Wpa2-Psk - ZyXEL Communications NBG6515 User Manual

The following table describes the labels in this screen.
Table 7 Wireless Security: No Security
LABEL
Wireless
Network Name
(SSID)
Security mode
Exit
Back
Next

2.5.2 Wireless Security: WPA-PSK/WPA2-PSK

Choose WPA-PSK or WPA2-PSK security in the Wireless Security screen to set up a password for
your wireless network.
Figure 13 Wireless Security: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 8 Wireless Security: WPA-PSK/WPA2-PSK
LABEL
Wireless
Network Name
(SSID)
Security mode
Wireless
password
Verify Password
Exit
Chapter 2 Connection Wizard
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the NBG, make sure all wireless stations use the same SSID in
order to access the network.
Select a Security level from the drop-down list box.
Choose None to have no wireless LAN security configured. If you do not enable any wireless
security on your NBG, your network is accessible to any wireless networking device that is
within range.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the NBG, make sure all wireless stations use the same SSID in
order to access the network.
Select a Security level from the drop-down list box.
Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key. Choose this
option only if your wireless clients support WPA-PSK or WPA2-PSK respectively.
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless
connection by configuring WPA in the wireless LAN screens.
Retype the password to confirm.
Click this to close the wizard screen without saving.
NBG6515 User's Guide
24