Wpa-Psk/Wpa2-Psk - ZyXEL Communications NBG6616 User Manual

Table 32 Network > Wireless LAN 2.4G/5G > General: Static WEP (continued)
LABEL
ASCII
Hex
Key 1 to Key 4
Apply
Cancel

11.3.3 WPA-PSK/WPA2-PSK

Select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 56 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
Chapter 11 Wireless LAN
DESCRIPTION
Select this option in order to enter ASCII characters as WEP key.
Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.
The WEP keys are used to encrypt data. Both the NBG6616 and the wireless stations
must use the same WEP key for data transmission.
If you chose 64-bits, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 128-bits, then enter 13 ASCII characters or 26 hexadecimal characters ("0-
9", "A-F").
You must configure at least one key, only one key can be activated at any one time. The
default key is key 1.
Click Apply to save your changes back to the NBG6616.
Click Cancel to reload the previous configuration for this screen.
NBG6616 User's Guide
94