20.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your NBG from a remote location through the following
interfaces:
• LAN and WAN
• LAN only
• WAN only
Note: The NBG is managed using the Web Configurator.
20.2 What You Can Do
Use the WWW screen
be managed remotely and specify a secure client that can manage the NBG.
20.3 What You Need to Know
Remote management over LAN or WAN will not work when:
The IP address in the Secured Client IP Address field
1
match the client IP address. If it does not match, the NBG will disconnect the session immediately.
There is already another remote management session. You may only have one remote
2
management session running at one time.
There is a firewall rule that blocks it.
3
20.3.1 Remote Management and NAT
When NAT is enabled:
• Use the NBG's WAN IP address when configuring from the WAN.
• Use the NBG's LAN IP address when configuring from the LAN.
C
Remote Management
(Section 20.4 on page
141) to define the interface/s from which the NBG can
NBG6503 User's Guide
140
HAPTER
(Section 20.4 on page
2 0
141) does not