Continuous Recording; Recording Status - Bosch Diniop IP - NWC-0455 Installation Manual

EN | 58

Continuous recording

You can specify the times during which continuous recording to the hard drive
should take place.
Separate selection fields are available for each day of the week. You can select up
to 16 individual recording time intervals for each day of the week.
Note
If a time interval has already been selected for alarm recording, you cannot
select it for continuous recording (see "Alarm recording" on page 59).
• Left-click the point in the schedule at which recording should start and hold
the button down.
• Drag the selected field to the desired recording end and then release the
mouse key.
• Right-click a highlighted time interval to delete it.
• Click the Select all button to highlight all time intervals.
• Click the Clear all button to delete all highlighted time intervals.

Recording status

The graphic indicates the recording activity in this partition. You will see an
animated graphic while recording is taking place.
Dinion IP
| Installation Manual
Bosch Security Systems | 2006-05 | V2.0