Target Lun; Target Password; Initiator Name; Initiator Extension - Bosch Diniop IP - NWC-0455 Installation Manual

EN | 52

Target LUN

Enter the LUN of the required drive.

Target password

If the drive is password protected, enter the password.
Note
You may not enter a new password. This is only possible by configuring
the iSCSI storage device.

Initiator name

The initiator name is automatically displayed after a connection has been
established.

Initiator extension

Enter the initiator extension. For the sake of clarity, you can enter a name or the
existing extension with a comment, for example "– Camera 2"

Decoupling the drive used

Each drive can only be associated with one user. If a drive is already being used
by another person, you can decouple the drive and connect the drive with the
NWC-0495.
• Double-click a drive that is already being used in the LUN map. You will see
a warning message.
• Confirm the decoupling of the current user. The drive is released and can be
connected to the NWC-0495.

Storage information

The status of the currently selected storage medium and the data throughput are
displayed here for information. You cannot change any of these settings.
Dinion IP
| Installation Manual
Bosch Security Systems | 2006-05 | V2.0