Table of Contents
Advertisement
MIC Series 550
To clear a character from a title:
1.
2.
3.
4.
To save a title:
1.
2.
16.5
Configuring Preposition Tours
A Preposition Tour automatically moves the camera through a series of preset or saved shots.
The MIC camera has one (1) standard preset tour and one (1) customized preset tour. Tour 1
is a standard tour that moves the camera through a series of shots in the sequence that they
were set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour
by inserting and deleting scenes.
To start Preposition Tour 1:
1.
2.
To stop a Preposition Tour:
4
To add or remove scenes to Preposition Tour 1:
1.
2.
To start custom Preposition Tour 2:
4
To edit a custom Preposition Tour 2:
1.
2.
To change the dwell period of a tour:
1.
2.
16.6
Recording Tours
The MIC camera can make up to two (2) recorded tours. A Recorded Tour saves all manual
camera movements made during the recording, including its rate of pan, tilt and zoom speeds
and other lens setting changes.
To Record Tour A:
1.
2.
To play back Recorded Tour A:
1.
2.
To Record Tour B:
1.
2.
Bosch Security Systems, Inc.
Use the joystick to highlight the Clear OR Position Character prompt.
Move the joystick left or right until the cursor is below the title character that you need to
clear.
Press Focus/Iris to clear the character.
Move the joystick up to bring the cursor back into the character palette.
Use the joystick to highlight the Exit prompt.
Press Focus/Iris to save the title.
Set a series of preset shots in the order that you want the MIC camera to cycle through.
Press ON-8-ENTER to start the tour. The tour then cycles through the series of shots until
it is stopped.
Press OFF-8-ENTER or move the joystick to stop either type of tour.
Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.
Use the Focus/Iris buttons to add or remove the selected scene from the tour.
Press ON-7-ENTER to start a tour. The tour cycles through the series of shots (in the
order that they were defined) until it is stopped.
Press SET-900-ENTER to access the Add/Remove Menu.
Press the Focus/Iris buttons to add or remove the selected scene.
Press ON-15-ENTER to access the Tour Period Menu.
Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions.
Press ON-100-ENTER to start recording a tour.
Press OFF-100-ENTER to stop recording.
Press ON-50-ENTER to begin continuous playback.
Press OFF-50-ENTER or move the joystick to stop playback.
Press ON-101-ENTER to start recording the tour.
Press OFF-101-ENTER to stop the tour.
Operation Manual
Common User Commands | en
2014.11 | 3.2 | F.01U.239.454
69
Advertisement
Table of Contents
