Basic Mode: Audio; Basic Mode: Recording - Bosch MIC-7230-PB4 Operation Manual

44 en | Configuration via IP, Basic Mode
Pre-programmed profiles are available, each giving priority to different perspectives. When
selecting a profile, details are displayed in the list field.
Default Profile name
HD Image Optimized
HD Balanced
HD Bit Rate Optimized
SD Image Optimized
SD Balanced
SD Bit Rate Optimized
DSL Optimized
3G Optimized
14.5

Basic Mode: Audio

Note for MIC7000 cameras only: These options are available only if you have connected a
VIDEOJET connect device (NPD-PSU-HPOE) to your camera.
You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser, you must select the option Transmit Audio on the LIVE
Functions page. (See LIVE Functions, page 50). For other connections, the transmission
depends on the audio settings of the respective system.
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps per connection in each direction. If you do not want any audio
data to be transmitted/received, select Off.
Line In
You can set the line input gain using the slider. Values range from 0 to 31. The default value is
0.
Line Out
You can set the line output gain using the slider. Values range from 0 to 79. The default value
is 0.
14.6

Basic Mode: Recording

You can record the images from the camera on various local storage media or on an
appropriately configured iSCSI system.
2014.05 | 1.0 | F.01U.291.520
Description
For an HD image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
For an HD image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
For an HD image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
For an SD image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
For an SD image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
For an SD image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
Ideal for encoding on a DSL uplink where bit rate limitations are
critical.
Ideal for encoding on a 3G uplink where bit rate limitations are
critical.
Operation Manual
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Bosch Security Systems, Inc.