Table of Contents
Advertisement
DINION 3100i IR
–
–
Status icons
Various overlays in the video image provide important status information. The overlays
provide the following information:
The frame might show artifacts due to decoding errors.
Indicates that an alarm has occurred.
A communication error, such as a connection failure to the storage medium, a protocol
violation or a timeout, is indicated by this icon.
Indicates a gap in the recorded video.
The watermark set on the media item is valid. The color of the check mark changes
according to the video authentication method that has been selected.
Indicates that the watermark is not valid.
Indicates that a motion alarm has occurred.
Indicates that recorded video is being retrieved.
4.2
Playback page
Click
is only visible when a direct iSCSI or memory card is configured for recording (with Video
Recording Manager (VRM) recording this option is not active).
On the left side of the screen, there are four groups:
–
–
–
–
4.2.1
Selecting the recording stream
Expand the Connection group on the left side of the browser.
To view a recording stream:
–
–
Bosch Security Systems B.V.
if the CPU load is too high, change the VCA settings,
if the network load is too big, change the encoder profile to reduce bitrate.
Decoding error
Alarm flag
Communication error
Gap
Watermark valid
Watermark invalid
Motion alarm
Storage discovery
Playback in the application bar to view, search or export recordings. This link
Connection
Search
Export
Track list
Click the Recording drop-down arrow to see the options.
Select one of the numbered recording streams.
User manual
Operation via the browser | en
2024-02 | V01 | DOC
15
Advertisement
Table of Contents
