Advertisement
Quick Links
1 en | Bosch Security Systems
Important Safety Instructions
Type numbers: NWC-0700, NWC-0800, NWC-0900
Read, follow, and retain all of the following safety instructions. Heed all
warnings on the unit and in the operating instructions.
1.
Clean only with a dry cloth. Do not use liquid cleaners or aerosol clean-
ers.
2.
Do not install unit near any heat sources such as radiators, heaters,
stoves, or other equipment (including amplifiers) that produce heat.
3.
Do not block any ventilation openings.
4.
Do not use the unit near water or expose to rain or moisture. Never
spill liquid of any kind on the unit.
5.
Unplug the unit during lightning storms or when unused for long peri-
ods.
6.
Adust only those controls specified in the operating instructions.
7.
Do not overload outlets and extension cords, as this can cause fire or
electrical shock.
8.
Protect the plug and power cord from foot traffic or pinching, at elec-
trical outlets, and at its exit from the unit.
9.
Operate the unit only from the type of power source indicated on the
label.
10. Unless qualified, do not attempt to service a damaged unit yourself.
Refer all servicing to qualified service personnel.
11. Use only replacement parts specified by the manufacturer.
12. Install in accordance with the manufacturer's instructions in accor-
dance with applicable local codes.
13. Use only attachments/accessories specified by the manufacturer.
Equipment change or modification could void the user's guarantee or
authorization agreement.
DANGER! High risk:
This symbol indicates an imminently hazardous situation such
as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING! Medium risk:
!
Indicates a potentially hazardous situation.
If not avoided, this could result in serious bodily injury or death
CAUTION!
Indicates a potentially hazardous situation. If not avoided, this
!
may result in minor or moderate injury. Alerts the user to
important instructions accompanying the unit.
F.01U.032.595 | V 1.0 | 2007.03
Quick Install Guide
Megapixel IP Cameras
Bosch Security Systems
Advertisement
Related Manuals for Bosch NWC-0700
Summary of Contents for Bosch NWC-0700
-
Page 1: Important Safety Instructions
1 en | Bosch Security Systems Megapixel IP Cameras Important Safety Instructions Type numbers: NWC-0700, NWC-0800, NWC-0900 Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit and in the operating instructions. Clean only with a dry cloth. Do not use liquid cleaners or aerosol clean- ers. - Page 2 NOTICE! You can view and print the full version of this Installation Manual with Adobe Acrobat Reader, both provided on the enclosed CD-ROM. This user guide is the intellectual property of Bosch Security Systems; protected by copyright. Bosch Security Systems Quick Install Guide...
- Page 3 3 en | Bosch Security Systems Megapixel IP Cameras FCC & ICES INFORMATION (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: – this device may not cause harmful interference, and –...
-
Page 4: Quick Install Guide
1 CAT5 cross-linked network cable – Power supply unit: 9-12 VDC, 500 mA. CAUTION! For 9-12 VDC units, voltage applied to the unit's power input should not exceed 12.3 VDC. Bosch Security Systems Quick Install Guide F.01U.032.595 | V 1.0 | 2007.03... -
Page 5: Configure Firewall
5 en | Bosch Security Systems Megapixel IP Cameras Attach camera to the 100 Mbps network input of the PC with the cross-link CAT 5 cable. Manual iris lens: check the lens to make sure the F-Stop is between F2.8 and F4.0. - Page 6 Results column, the installation process is complete. Write down the (MAC) Ethernet address, corresponding IP address, and installed location. Click Save / Exit when done. Fig. 1.1 Camera installation in basic mode showing results Bosch Security Systems Quick Install Guide F.01U.032.595 | V 1.0 | 2007.03...
- Page 7 7 en | Bosch Security Systems Megapixel IP Cameras Fig. 1.2 Camera installation in advanced mode showing results Advanced mode Start making a list of Ethernet (MAC) addresses and IP addresses assigned to them. The Ethernet address is on the camera label.
- Page 8 Megapixel IP Cameras Quick Install Guide | en 8 Rotate lens in or out with back focus ring until focus is obtained. Fasten the two set screws. Bosch Security Systems Quick Install Guide F.01U.032.595 | V 1.0 | 2007.03...