Alarm Out; Service Settings - Bosch Diniop IP - NWC-0455 Installation Manual

Dinion IP
EN | 72 | Installation Manual

Alarm out

Select the event that will trigger the alarm output;
– an internal motion detection/VCA,
– an internal day/night switching, or
– an external trigger from the network.
For example, it is possible to switch on a spotlight in response to a motion alarm
and switch it off again when the alarm is over.
Relay name
The relay can be assigned a name here. The name is shown on the button next to
Trigger relay. The Livepage can also be configured to display the name next to
the relay icon.
Trigger relay
Click the button to switch the relay manually (for example for testing purposes or
to operate a door opener).

Service Settings

Bosch Security Systems | 2006-05 | V2.0