Dinion Ip | Installation Manual En; Network Connection; System Requirements (See Page 12 For More Detailed Requirements); Establishing The Connection - Bosch Diniop IP - NWC-0455 Installation Manual

Dinion IP
| Installation Manual

Network connection

A computer with Microsoft Internet Explorer can be used to receive live images
from the camera, control cameras and replay sequences stored on the local hard
drive. The camera is configured over the network using the browser or via the
Configuration Manager (supplied with the product). The configuration options
using the menu system of the camera itself are limited to setting up the lens and
network.
Note
The camera can also be connected to DIBOS 8.0, VIDOS and BVMS
video management systems as well as third party video management
systems.
System requirements
• Microsoft Internet Explorer version 6.0 or higher
• Monitor resolution 1024 × 768 pixels
• Intranet or Internet network access
To play back live video images, an appropriate MPEG ActiveX must be installed
on the computer. If necessary, the required software and controls can be installed
from the product CD provided.
– Insert the CD into the CD-ROM drive of the computer. If the CD does not
start automatically, open the root directory of the CD in Windows Explorer
and double click MPEGAx.exe.
– Follow the on-screen instructions.

Establishing the connection

The camera must be assigned a valid IP address to operate on your network. The
default address pre-set at the factory is 192.168.0.1
– Start the Web browser.
– Enter the IP address of the camera as the URL.
Bosch Security Systems | 2006-05 | V2.0
(see page 12 for more detailed requirements)
EN | 25
4