Password Protection - Bosch Diniop IP - NWC-0455 Installation Manual

EN | 36

Password protection

A camera is generally protected by a password to prevent unauthorized access to
the unit. You can use various authorization levels (User name:) to limit access.
Note
Proper password protection is only guaranteed if all higher authorization
levels are also protected with a password. For example, if a live password
is assigned, a service and a user password should also be set. When
assigning passwords, you should always start from the highest
authorization level.
User name
The camera recognizes three user names: service, user and live, which
correspond to different authorization levels.
• The user name service represents the highest authorization level. After
entering the corresponding password, you can use it to access all the functions
of the camera and change all configuration settings.
• The user name user represents the middle authorization level. You can use it
to operate the unit and also to control cameras, but you cannot change the
configuration.
• The user name live represents the lowest authorization level. It can only be
used to view the live video image and switch between the different live image
displays.
Password
You can define and change a separate password for each user name if you are
logged on as Service or if the unit is not protected by a password. Enter the
password for the selected user name here.
Confirm password
Re-enter the new password to rule out typing mistakes.
Dinion IP
| Installation Manual
Bosch Security Systems | 2006-05 | V2.0