Controlling What You Hear; Adjusting Volume; Muting The Microphone - Polycom QDX 6000 User Manual

User's Guide for Polycom QDX 6000 Systems

Controlling What You Hear

Adjusting Volume

Muting the Microphone

10
Select this setting...
Auto
Off
To show the PIP during a call:
Repeatedly pressing
display. PIP can change to show the near or far site.
Use the remote control to raise or lower the volume of the sound you hear.
To adjust the volume:
Press Volume on the remote control.
Changing the volume affects only the sound you hear at your site.
You can mute the microphone if you do not want the far site to hear you.
To mute or unmute the microphone:
Press Mute on the remote control.
If a Polycom microphone is connected to your system, you can also mute the
call by pressing Mute button the microphone.
Muting the microphone does not mute audio coming from any device connected to
the VCR audio inputs.
To set the PIP...
Be shown when the user operates the remote control and
be turned off when the user puts the remote control on the
table (the PIP window is closed when the user presses the
hook at the bottom of remote control, and it is opened when
the hook is released).
Be turned off during the call.
PIP on the remote control to switch to the PIP
© Polycom, Inc.