Server Dimensions; Server Components; Processor; Memory - HP Integrity rx2620 User's & Service Manual

Server Dimensions

Table 1-1 shows the dimensions and weight of the rx2620 server.
Table 1-1 Server Dimensions
Dimensions
Rack units
Height
Width
Depth
Weight
• Min
• Max

Server Components

The following components make up the HP Integrity rx2620 server.

Processor

• 1.4 GHz/12 MB L3 cache dual-core processor
• 1.6 GHz/18 MB L3 cache dual-core processor

Memory

• 12 memory DIMM slots
• 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB standard 184 pins 2.5 V DDR1, CL2, registered, ECC
• 133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 Gb/s peak data bandwidth
• Minimum memory size of 1 GB with four 256 MB DIMMs
• Maximum memory size of 32 GB with eight 4 GB DIMMs
• Upgrades must be made by quads of DIMMs
• DIMMs loaded by quads enable interleaved mode and chip spare

PCI Riser

• Four independent PCI-X 133 MHz 64 bit, 3.3 V, 15 W slots. There is no 5 V card and hot plug support
NOTE Some 25 W cards are supported. See the following slot matrix (by server):
http://www.docs.hp.com/en/SSM1-EL/slotmatrix.htm
For more information regarding specific I/O cards, see:
http://www.docs.hp.com/en/netcom.html
Chapter 1
Value
2U
8.6 cm (3.4 in.)
48.3 cm (19.0 in.)
67.9 cm (26.8 in.)
17.5 kg (38.6 lb.)
22.2 kg (49.0 lb.)
Introduction
Server Components
19