Figure 4-23 Dimm Slot Identification - HP Integrity rx2620 User's & Service Manual

Removing and Replacing Components
Removing and Replacing Internal Components
Figure 4-23 DIMM Slot Identification
Pair 4 (3A and 3B)
Pair 6 (5A and 5B)
Pair 2 (1A and 1B)
Cell 1
Cell 0
Pair 1 (0A and 0B)
Pair 5 (4A and 4B)
Pair 3 (2A and 2B)
Removing DIMMs
To remove memory DIMMs, perform the following steps:
Step 1. Turn off the server and disconnect all the cables. See "Powering Off the Server" on page 42 for more
information.
Step 2. Remove the top metal cover. See "Removing the Top Metal Cover" on page 50.
Step 3. Identify the DIMM to be removed and push the appropriate extraction levers found on either side of
the DIMM slot outward to the open position. The DIMM ejects from the slot.
Step 4. Remove the DIMM from the socket. If the removed memory is functional, store it in a static-free
container for future use.
66
Rear
1A 5A 3A
1B 5B 3B
4B 2B
0B
0A 4A 2A
Front of server
Quad 1 = Pair 1 and Pair 2
Quad 2 = Pair 3 and Pair 4
Quad 3 = Pair 5 and Pair 6
Chapter 4