HP Integrity rx2620 User's & Service Manual page 162

Booting the Operating System
Booting and Shutting Down Microsoft Windows
Windows Shutdown from the Command Line
From the Windows command line, issue the shutdown command to shut down the operating system.
Step 1. Log in to Windows running on the server that you want to shut down.
For example, access the system console and use the Windows SAC interface to start a command
prompt, from which you can issue Windows commands to shut down the server.
Step 2. Check to see whether any users are logged in.
Use the query user or query session command.
Step 3. Issue the shutdown command and the appropriate options to shut down the Windows Server 2003
on the server.
You have the following options when shutting down Windows:
• To shut down Windows and reboot:
shutdown /r
or choose the
• To shut down Windows and halt (power off server hardware):
shutdown /s
or choose the
To reboot a halted server you must power on the server using the PC command at the iLO MP
Command menu.
• To abort a shutdown (stop a shutdown that has been initiated): shutdown /a
For example:
shutdown /r /t 60 /c "Shut down in one minute."
This command initiates a Windows system shutdown and reboot after a timeout period of 60
seconds. The /c option specifies a message that is broadcast to any other users of the server.
162
action and choose
Start —> Shut Down
action and choose
Start —> Shut Down
from the pull-down menu.
Restart
from the pull-down menu.
Shut down
Appendix B