Booting And Shutting Down Hp Openvms; Adding Hp Openvms To The Boot Options List - HP Integrity rx2620 User's & Service Manual
Hp integrity rx2620 server user service guide
Hide thumbs
Also See for Integrity rx2620:
- User's & service manual (169 pages) ,
- Read me first (2 pages) ,
- Service manual (177 pages)
Table of Contents
Advertisement
The command-line options you specify dictate the way in which HP-UX shuts down, and whether
the server is rebooted.
Use the following list to choose an HP-UX shutdown option for your server:
•
To shut down HP-UX and halt (power off) the server, issue the shutdown -h command.
To reboot a halted server you must power on the server using the PC command at the iLO MP
Command menu.
•
To shut down HP-UX and reboot the server, issue the shutdown -r command.
Booting and Shutting Down HP OpenVMS
This section has procedures for booting and shutting down HP OpenVMS on entry-class HP Integrity servers,
and procedures for adding HP OpenVMS to the boot options list.
•
To add an HP OpenVMS entry to the boot options list, refer to "Adding HP OpenVMS to the Boot Options
List" on page 155.
•
To boot HP OpenVMS on an entry-class HP Integrity server, refer to "Booting HP OpenVMS" on page 156.
•
To shut down HP OpenVMS, refer to "Shutting Down HP OpenVMS" on page 158.
Adding HP OpenVMS to the Boot Options List
On HP Integrity servers, you can use the following procedures to manage boot options list entries for HP
OpenVMS.
You can add the \efi\vms\vms_loader.efi loader to the boot options list from the EFI Shell or
(or in some versions of EFI, the
Configuration Menu
NOTE
On HP Integrity servers, the operating system installer automatically adds an entry to the boot
options list.
Adding an HP OpenVMS Boot Option
This procedure adds an HP OpenVMS item to the boot options list from the EFI Shell.
To add an HP OpenVMS boot option when logged in to OpenVMS, use the @SYS$MANAGER:BOOT_OPTIONS.COM
command.
Step 1. Access the EFI Shell environment.
Log in to the iLO MP and enter CO to access the system console.
When accessing the console, confirm that you are at the
another EFI menu, choose the
the
EFI Boot Manager
From the
EFI Boot Manager Menu
environment.
Appendix B
Boot Option Maintenance Menu
option from the submenus until you return to the screen with
Exit
heading.
, choose the
Booting and Shutting Down HP OpenVMS
EFI Boot Manager Menu
option to access the EFI Shell
EFI Shell Menu
Booting the Operating System
EFI Boot
).
. If you are at
155
Advertisement
Table of Contents
Troubleshooting
