Rear Panel; Table 2-6. Rear Panel Connectors And Switches; Figure 2-6 Rear View - HP Integrity rx2620 User's & Service Manual

Controls, Ports, and LEDs

Rear Panel

Rear Panel
The HP Integrity rx2620 server rear panel includes communication ports, I/O ports, AC power connectors,
and the locator LED/button. Additional LEDs located on the rear panel of the server signal the operational
status of the LAN connector of the optional iLO MP. See Figure 2-6 and Table 2-6 for the location and
description of the ports and connectors.
Figure 2-6 Rear View
VGA Port
AC Power Receptacles
AC 2 AC 1
WARNING Unplug all power cords from system before servicing
PWR
2
Management Card
LAN 10/100
Automatic Internal SCSI Termination
SCSI LVD/SE
LVD/SE SCSI
10/100
Management LAN
LAN Gb A
10/100/1000 LAN
Table 2-6 Rear Panel Connectors and Switches
Connector/Switch
AC Power
LVD/SE SCSI
(LAN Gb A)
10/100/1000 LAN
(LAN Gb B)
10/100/1000 LAN
Serial A (console)
and Serial B
USB
TOC
36
PWR
1
VGA CONSOLE / REMOTE / UPS
MP
RESET
TOC
LAN Gb A LAN Gb B
LAN Gb B
10/100/1000
LAN
Primary power connection (AC1) for the server. A second connector (AC2) is
available for the optional, N+1 redundant power supply.
68-pin, low-voltage differential, single-ended U320 SCSI. This connector provides
external SCSI connection on Core SCSI Channel B
10/100/1000 base-T ethernet LAN connector
10/100/1000 base-T ethernet LAN connector
9-pin male serial connectors. Serial Port A is used as the console connection when
the optional iLO MP is not installed.
Four universal serial bus (USB 2.0) connectors
Transfer of control button. Halts all system processing and I/O activity and
restarts the computer system preserving system memory contents.
System Lock
Console/Remote/UPS
CONSOLE
SERIAL A
SERIAL B
USB
USB Ports Serial Port B
ToC Button
Locator Button and LED
Function
Console/Serial Port A
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4 PCI Slot 4
Chapter 2