Function Table; Structure And Sequence Of The Function Table; Display And Keys - A&D FZ-i WP Series Instruction Manual

The function table reads or rewrites the parameters that are stored in the balance. These parameters
stored, even if the AC adapter is removed, are maintained in non-volatile memory.

10.1. Structure and Sequence of the Function Table

The function table menu consists of two layers. The first layer is the "Class" and the second layer is the
"Item". Each item stores a parameter.
Example
This example sets "Auto print mode A" for "Data output mode" and "100 digits" for "Auto print
difference".
Start, From weighing mode
Press and hold
(for 2 seconds)
Class
End, To weighing mode
10.2.

Display and Keys

Display/Key Description
The symbol " " indicates that the parameter displayed is in effect.
When pressed and held for 2 seconds in the weighing mode, enters the function
table mode.
Selects the class or item in the function table mode.
Changes the parameter.
When a class is displayed, moves to an item in the class.
When an item is displayed, stores the new parameter and displays the next class.
When an item is displayed, cancels the new parameter and displays the next class.
When a class is displayed, exits the function table mode and returns to the weighing
mode.

10. FUNCTION TABLE

Press
several
times
Item
Press one time
Press two times
Press one time
Item
"Auto print difference"
41
Item
"Data output mode"
Parameter
"Auto print mode A"
Parameter
"100 digits"