Using The Remote Control - Polycom QDX 6000 User Manual

User's Guide for Polycom QDX 6000 Systems

Using the Remote Control

Adjust the camera; navigate through
Return to the Place a Call (home) screen
Increase or decrease the sound you hear
from the far sites
Zoom the camera image in or out
Mute the sound you are sending to the far
Turn automatic camera tracking to presets
Select a camera or other video source
Display the onscreen keyboard so you can
Delete letters or numbers
Start and stop sending content to far sites
2
You use the remote control to place calls, adjust the volume, navigate screens,
and select options.
Place a call
menus
sites
on or off
enter text
• The appearance of your remote control may slightly differ from what has been
illustrated in this figure. The picture here is for illustration purposes only.
• The Snap feature of remote control is not enabled in this version, but this button
currently supports the Calendar feature and quick access to the Recent
Calls and System Information screen.
End a call
Open the directory to make a call or work
with an entry
Confirm your current selection; perform
functions on highlighted items
Return to the previous screen
Select a far-site camera or video source
Select a near-site camera or video source
Cycle through display layouts
Store camera positions (when followed by
a number); delete all stored camera
positions
Enter a dot in an IP address
Enter numbers or text; move the camera
to a stored position
Access the online help; see current
system status while in a call; access the
System screen
© Polycom, Inc.