Switching Between Full Screen Video And The Home Screen; Adjusting Screen Layout - Polycom QDX 6000 User Manual

User's Guide for Polycom QDX 6000 Systems

Switching Between Full Screen Video and the Home Screen

Adjusting Screen Layout

8
When the call connects, the system automatically shows video on the whole
screen. You can switch back to the home screen during a call if, for example,
you need to adjust a user setting, and your system is configured to allow you
to do so.
To see video in the full screen:
Press Near on the remote control.
To see the home screen:
Press Home on the remote control.
In calls, you can change the current screen layout on the monitor. What you
see during a call can depend on factors such as the system monitor
configuration, the number of sites in the call, whether the Picture-in-Picture
(PIP) is enabled and whether the content is being shared.
To change the screen layout:
In a call, repeatedly press
the screen layouts supported by the Polycom QDX 6000 system. These might
include the following layouts:
Far site, full screen
Far and near sites, the same size,
side by side
PIP on the remote control to switch among
© Polycom, Inc.