Connection - Hamamatsu Photonics C11440-22CU Instruction Manual

7. CONNECTION

• When you connect cables, turn off the power supply of the camera and the peripheral devices.
Note
• If you use the adjuster pole and the base plate, see each installation manual.
Refer to the figure when connecting the various cables.
 Overall connection
Interface cable
Interface board
Place the camera the water connectors to be lateral side. Do not place
•
the rear panel of the camera, which connectors are located, to be at the
bottom (Do not block ventilation openings.).
Camera (Rear)
① AC adaptor
Computer
C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
② Cooling water hose (2 hoses)
Figure 7-1
Circulating water cooler
15