Specifications; Camera Specifications - Hamamatsu Photonics C11440-22CU Instruction Manual

14. SPECIFICATIONS

14-1 CAMERA SPECIFICATIONS

(1) Electric specifications
Imaging device
Effective number of pixels
Cell size
Effective area
Full well capacity (typ.)
Readout noise (typ.)
1
Dynamic range *
Cooling method
at Forced air-cooled
at Water-cooled
Cooling
temperature
at Maximum cooling
at Full resolution
at 1024 lines
at center position
Frame rate
Top: standard scan
at 8 lines
Bottom: slow scan
at center position
at Horizontal 512 pixels
at 8 lines
at center position
Normal readout mode
Binning readout mode
Readout mode
Sub-array readout mode
Readout time
Light sheet mode Exposure time
Readout mode
at - 10 °C
Dark current at - 20 °C
at - 30 °C
A/D bit
Linearity
Free running mode
Exposure time Free running mode
(Standard scan) / Sub-array mode
External trigger mode
C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
Camera Link
Scientific CMOS image sensor FL-400
2048 (H) × 2048 (V)
6.5 µm (H) × 6.5 µm (V)
13.312 mm (H) × 13.312 mm (V)
30 000 electrons
1.0 electrons (median) 1.6 electrons (r.m.s) at standard scan
0.8 electrons (median) 1.4 electrons (r.m.s) at slow scan
37 000 : 1
Peltier device + Forced air-cooled, Water-cooled
- 10 °C (Ambient temperature: + 20 ºC)
- 20 °C (Water temperature: + 20 ºC)
- 30 °C (typ.)
(at Water-cooled;
Water temp. 15 °C, Ambient temp. 20 °C)
100 frame/s
30 frame/s
200 frame/s
60 frame/s
25 655 frame/s
7 696 frame/s
－
2×2,4×4 (Digital binning) *
Upper and lower
symmetric area
20 ms to 204.8 s
9.7 µs to 10 s
Full/Sub-array
0.06 electron/pixel/s
0.02 electron/pixel/s
0.006 electron/pixel/s
Less than 3 %
1 ms to 10 s
38.96 µs to 10 s
1 ms to 10 s
USB 3.0
30 frame/s
60 frame/s
7894 frame/s
25 655 frame/s
1×1
2
Configurable for each
vertical 8 pixels and
horizontal 512 pixels.
―
―
―
16 bit
55