Connection; Connecting Of Cables - Hamamatsu Photonics C11440-22C Insctruction Manual

C11440-22C Instruction manual_Ver.1.4

7. CONNECTION

7-1

CONNECTING OF CABLES

Refer to the figure when connecting the various cables.
① CameraLink interface cable 1
② CameraLink interface cable 2
To connector2
To connector1
CameraLink
Interface board
When you connect cables, turn off the power supply of the camera and the peripheral devices.
•
Note If you use the adjuster pole and the base plate, see each installation manual.
•
CAUT ION
14
Computer
Place the camera the water connectors to be lateral side. Do not place
•
the camera the rear panel of the camera, which connectors are located,
to be at the bottom (Do not block ventilation openings.).
Camera (rear)
④ Cooling water hose (2 hoses)
③ AC adaptor
Figure 7-1
Circulating water cooler