Real-Time Correction Functions - Hamamatsu Photonics C11440-22CU Instruction Manual

C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
External trigger
0H
1H
・
・
1023H
1024H
.
.
2046H
2047H
Hsync
Figure 10-24 Programmable timing output referenced with Hsync
When you choose Hsync for the reference of programmable timing output, camera can output
some pulses before start the exposure. It is called as Pre-Hsync. You can set the number of
Pre-Hsync with a software command.

10-4 REAL-TIME CORRECTION FUNCTIONS

There are a few pixels in FL-400 that have slightly higher readout noise performance
compared to surrounding pixels. The camera has real-time variant pixel correction features
to improve image quality. The correction is performed in real-time without sacrificing the
readout speed at all. This function can be turned ON and OFF. (Default is ON)
50
Delay
Pulse Width
Exposure