Operating Environment - Hamamatsu Photonics C11440-22CU Instruction Manual

AC adaptor
When unplugging the AC adaptor, always pull by the plug, not the cord.
Doing so can lead to fire or electric shock.
Remove the AC adaptor from the outlet when not using the camera for long
periods of time. Doing so can damage the cable and lead to fire or electric
shock.
Connecting and disconnecting cables
Always turn off the power supply of the peripheral device before
connecting and disconnecting cables.
Fixed the camera
When fitting the camera to a tripod or other fixture, use the optional base
plate. Be careful that the fitting screw does not enter more than 8 mm from
the surface of the base plate. Screwing it in excessively can impair normal
operation.
Lenses (C11440-22CU)
Be careful not to screw the lens more than 7 mm onto the C-mount of the
camera. Doing so can scratch the protective glass. (Some wide-angle
lenses in particular can have a thread of 7 mm or more.)
Shipping precautions
When transporting the camera by truck, ship, airplane, etc., wrap it
securely in packaging material or something similar.
Strong impact
Do not subject the camera to strong shocks by dropping it, for example.
Doing so can damage the camera.
At the water cooling
Be careful water does not splash on the camera. Cut off the power supply
of the circulating water cooler and the camera when you remove and install
the cooling water hoses.

Operating environment

This system is designed and tested for use in an industrial environment. If
this system is used in residential areas, EMI (electro-magnetic
interference) may occur. This system must not be used in residential
areas.
C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
3