Hamamatsu Photonics C11440-22CU Instruction Manual page 35

10-2-4-2 Electrical shutter mode
The electrical shutter mode is used to get a proper signal level when signal overflow happens
due to too much input photons in normal readout mode. In this mode, the fastest frame rate is
100 Hz (via Camera Link) or 30 Hz (via USB 3.0) at full resolution even when the exposure time
is short.
[Camera Link]
[USB 3.0]
C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
Figure 10-5
Figure 10-6
33