Hamamatsu Photonics C11440-22CU Instruction Manual page 18

C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
■ Connection to Camera Link
③ ④
Camera Link Camera Link
interface cable 1 interface cable 2
To
connector 2
To connector 1
•
•
① AC adaptor
This is the cord to supply a power supply. Use the accessory AC adaptor.
② Cooling water hose (at Water-cooling: Option)
It connects the camera and circulating water cooler. The insert position of WATER IN/OUT on
the camera WATER connector is not specified.
16
Camera (Rear)
① AC adaptor
Computer
Camera Link interface board
Figure 7-2
Do not connect Camera Link and USB 3.0 interface simultaneously.
When a connection interface is changed from Camera Link to USB 3.0, and vice
versa, the application software must be closed and the camera must be turned off.
Please see 8. [Water cooling] for details.
•
■ Connection to USB 3.0
Camera (Rear)
AC adaptor ①
Computer
USB 3.0 interface board
Figure 7-3
⑤ USB 3.0
interface cable