10-2-7 SLOW SCAN
It can change from the standard scan (Default)
Read-out noise is reduced with slow scan.
•
Please refer to Figure 10-2-2 FRAME RATE CALCULATION about the frame rate value and
Note
calculation formula with slow scan.
10-2-7-1 Timing Diagram
The read-out time is 33 ms at full frame and the frame rate is 30 frames/s at fastest.
The timing diagram for slow scan is similar to the timing diagram for the standard scan except
readout time. Please refer to the timing diagram of standard scan for each trigger mode.
C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
to the slow scan with a command.
Figure 10-13
41