Activate Recording - Mobotix Q24M User Manual

138
/164

Activate recording:

Admin Menu >
Storage on External File
Server / Flash Device
Q24M Camera Manual: Operating The Camera
3.4.3 Activate Recording
Follow these steps to activate the recording to a MicroSD card that has already been
MxFFS-formatted (Admin Menu > Storage on External File Server / Flash Device):
1. Make sure that there is a MicroSD card in the card slot of the MOBOTIX camera.
2. Make sure that the MicroSD card is formatted in MxFFS format.
3. Activate the SD Flash Card option.
4. Click on Set and then Close to store the configuration.
5. Reboot the MOBOTIX camera (Admin Menu > Reboot Camera).
Once the camera has rebooted, make sure that the camera displays the FR REC symbols
in its live image. If this is the case, the camera uses the MicroSD card as recording target.
If not, you must activate the recording (see below).
Activating The Recording
If the FR REC symbols are not visible in the live image after rebooting, you need to activate
the recording using one of the following methods:
• In the web browser: Automatic activation by clicking on the Arm & Record softbut-
ton. Confirm this in the Easy Dialog by clicking on the yes button.
• In the web browser: Manual activation via the Quick Control Recording > Recording
on or in Setup Menu > Recording.
• MxEasy: It is possible to activate the recording based on the time or date using the
Alarm Planner of MxEasy (see MxEasy User Manual ).
Encryption And Authentication
All video data stored on the MicroSD card is encrypted to ensure security at all times.
The password for this is defined during the card's formatting procedure and needs to
be entered for authentication whenever the recordings are accessed (see next section).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com