Mobotix Q24M User Manual page 68

68
/164
Open the cable
retainer by rotating
the bayonet catch to
the marked position
Bayonet catch open
Q24M Camera Manual: Installation
Note on fastening cables leading in to the camera:
Cables passing in to the back of the camera (patch cable
for the network connection and ExtIO cable) are secured
using a special cable retainer with bayonet catch.
When replacing this cable, ensure that the cable is prop-
erly seated in the connector and that the retainer with
the blue bayonet catch is locked (short clockwise turn
until it clicks into place).
Removing The Cable Retainer
Rotate the bayonet catch anti-clockwise to the "open circle" symbol (see diagram). The
catch may be removed from the side. The cable can now be pulled out of the camera.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Note
www.mobotix.com • sales@mobotix.com