Mobotix Q24M User Manual page 111

First Images And The Most Important Settings
Linux/Unix:
1. Open a terminal as root user.
2. Enter the following command: ifconfig eth0:1 10.8.0.11
3. The computer is now also using the IP address 10.8.0.11
Mac OS X:
1. Open System Properties > Network.
2. Select Ethernet. In the Configuration field, select
Manual and enter a 10.x.x.x IP address (for
example, 10.8.0.11).
3. Click on Apply on the bottom right-hand side of the
dialog box to assign the computer the IP address
10.8.0.11.
2. Set Up The Target Network Parameters Of The MOBOTIX Camera:
1. Open a web browser on the computer and enter the default IP address of the MOBOTIX
camera in the address bar of the browser (for example, 10.8.0.99). Pressing Enter
displays the user interface of the MOBOTIX camera (see also Section 3.2.2, «First
Images And The Most Important Settings In The Browser» ).
2. Click on the Admin Menu softbutton in the user interface of the MOBOTIX camera.
The Quick Installation starts automatically once the
admin user has logged on.
Note: The Quick Installation can also be executed at a later stage by opening
Admin Menu > Network Setup > Quick Installation (see also Quick Installation in
the Camera Software Manual Part 2 ).
3. Enter the target network parameters of the camera
on the appropriate page of the Quick Installation
assistant.
Note: The network parameters can also be modi-
fied retrospectively via Admin Menu > Network
Configuration > Quick Installation.
4. Once you have completed the Quick Installation and rebooted the camera, the
new network parameters will be activated. The camera can now be connected
to the target network and, if required, further configured.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
111
/164
Default user data
User name: admin
password: meinsm