Special Q24M Configuration In The Browser - Mobotix Q24M User Manual

128
/164
Q24M Camera Manual: Operating The Camera

3.3.3 Special Q24M Configuration In The Browser

Thanks to its hemispherical lens, the MOBOTIX Q24M provides certain special configuration
options for the image settings. Depending on where the camera is mounted (ceiling or
wall) and on the live image display preferred by the user, certain important basic settings
and, if necessary, their adjustment must be configured when a Q24M is first installed.
A corresponding adjustment of the image setting is strongly recommended if the on-wall
set is mounted with an inclination of 10 degrees (available as a Q24M accessory).
Configuration Of The Q24M Basic Parameters
Complete the steps described below in the browser window:
1. Log onto the camera and boot it as described in Section 3.2 .
2. Select mounting position wall/ceiling/floor: Click on Installation in the Quick Control
panel and then select Wall, Ceiling or Floor according to the mounting position of the
camera. Ceiling always means that the orientation of the camera or sensor module
is from top to bottom and for Floor, the camera or sensor module's orientation is
from bottom to top .
As a result, you will get a perspective-corrected panorama view for each image
sensor matching the specified mounting position. Panorama view is set as a factory
default and it can be changed as described below.
3. Switch to the Display Mode Quick Control.
4. Set the mode that you want to be the standard view. For demonstration purposes,
the descriptions below describe the typical display mode for the wall mount and
the ceiling mount, Panorama and Surround respectively. Every other display mode
can be operated in the same way.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com