Mobotix Q24M User Manual page 69

Mounting The Camera Without Accessories
Original MOBOTIX cable
Only use
from other suppliers do not meet the necessary specifications for proper retention
(no IP54 and IP65 weather protection).
Replacing The Cable Retainer
Insert the cable into the receptacle on the camera. Position the bayonet catch from the
side (opening points to the right). Rotate the bayonet catch clockwise to the "filled circle"
symbol (see image). The cable is now properly retained.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Caution
to connect the camera. Standard cables purchased
Ethernet patch cable MiniUSB cable
69
/164
Close the cable
retainer by rotating
the bayonet catch to
the marked position
Bayonet catch closed