Assembling The Secondary Sheave - Yamaha XP500 2001 Service Manual

BELT DRIVE
EAS00324

ASSEMBLING THE SECONDARY SHEAVE

1. Lubricate:
S secondary fixed sheave's outer and inner
surface 1
S secondary sliding sheave's outer and inner
surface 2
S grease nipple groove
S oil seals
S bearings
(with the recommended lubricant)
Recommended lubricant
BEL-RAY assembly lube
2. Install:
S secondary sliding sheave 1
3. Install:
S guide pin 2
4. Lubricate:
S guide pin groove 3
S oil seal
New
(with the recommended lubricant)
Recommended lubricant
BEL-RAY assembly lube
5. Install:
S spring seat 1
S compression spring 2
S upper spring seat 3
NOTE:
Attach the sheave spring compresser 2 onto
the secondary sheave as shown.
Then compress the spring, and tighten the sec-
ondary sheave nut 1 with locknut wrench 3 .
5-52
ENG