Cleaning The V-Belt Case Air Filter Element; Checking The Carburetor Joints And Intake Manifolds - Yamaha XP500 2001 Service Manual

CLEANING THE V-BELT CASE AIR FILTER ELEMENT/CHECKING
THE CARBURETOR JOINTS AND INTAKE MANIFOLDS
CLEANING THE V-BELT CASE AIR FILTER
ELEMENT
1. Remove:
S upper side cover mole (left)
S footrest board (left)
Refer to "COVER AND PANEL".
2. Remove:
S V-velt case air filter element 1 and 2
3. Clean:
S V-velt case air filter element
Apply compressed air to the inner surface of
V-velt case air filter element.
4. Check:
S V-velt case air filter element
Damage ! Replace.
CAUTION:
Since the V-belt case air filter element is a dry
type, do not let grease or water contact it.
5. Install:
S footrest board (left)
S upper side cover mole (left)
CHECKING THE CARBURETOR JOINTS
AND INTAKE MANIFOLDS
The following procedure applies to all of the car-
buretor joints.
1. Remove:
S legshield
Refer to "COVER AND PANEL".
3-28
CHK
ADJ