Changing The Chain Drive Oil; Checking And Adjusting The Steering Head - Yamaha XP500 2001 Service Manual

CHANGING THE CHAIN DRIVE OIL/

CHECKING AND ADJUSTING THE STEERING HEAD

CHANGING THE CHAIN DRIVE OIL
1. Place a container under the chain drive.
2. Remove:
S chain drive oil drain bolt 1
S chain drive oil filler cap
Completely drain the chain drive of its oil.
3. Check:
S drain bolt gasket
Damage ! Replace.
4. Install:
S chain drive oil drain bolt
5. Fill:
S chain drive oil
(with the specified amount of the recomen-
ded chain drive oil)
Quantity
0.7 L
6. Check:
S chain drive oil level
Refer to "CHECKING THE CHAIN DRIVE
OIL LEVEL".
EAS00146
CHECKING AND ADJUSTING THE STEER-
ING HEAD
1. Stand the scooter on a level surface.
WARNING
Securely support the scooter so that there is
no danger of it falling over.
NOTE:
Place the scooter on a suitable stand so that the
front wheel is elevated.
3-40
CHK
ADJ
20 Nm (2.0 mSkg)