Assembling The Secondary Sheave - Yamaha MIO Service Manual

1
2
EAS00324

ASSEMBLING THE SECONDARY SHEAVE

1. Lubricate:
• secondary fixed sheave's inner surface 1
2
• secondary sliding sheave's inner surface 2
• oil seals
• bearings
(with the recommended lubricant)
CAUTION:
Do not get any grease on the surfaces of
the sheaves. If any grease gets on the
sheaves, be sure to wipe it off with alcohol,
etc.
2. Install:
• oil seals
3
• secondary sliding sheave 1
• secondary fixed sheave 2
NOTE:
1
_
Install the secondary sliding sheave onto the
secondary fixed sheave 2 with the oil seal
guide 3.
3. Lubricate:
• secondary sliding sheave's inner surface
(with the recommended lubricant)
NOTE:
Apply 3 cc of Shell Dolium Grease R
inner surface of the secondary fixed sheave.
4 - 53
BELT DRIVE
Recommended lubricant
Shell Dolium Grease R
New
Oil seal guide
90890-01384
Recommended lubricant
Shell Dolium Grease R
ENG
®
®
®
to the