Table of Contents
Advertisement
11
Cache function of web browsers
The newest information may not appear on the Web Connection page due to
the cache function of the Web browser. In addition, problems can occur
when the cache function is used.
When using Web Connection, disable the cache function of the Web
browser.
!
Detail
The menus and commands may vary depending on the Web browser. For
details, refer to Help for the Web browser.
If the cache function is enabled on the Web browser and a timeout occurs
in administrator mode, the timeout page may appear even when Web
Connection is accessed again. When this happens, the machine's control
panel remains locked, and the main power of this machine must be
turned off, then on again. To avoid such problems, disable the cache
function.
When turning the power off, then on again, be sure to turn the sub-power
switch off first, then the main power switch. In addition, wait at least 10
seconds before turning the power on again; otherwise, this machine may
not function properly.
On Internet Explorer
1
On the "Tools" menu, click "Internet Options".
2
On the general tab, click the [Settings] button under "Temporary
Internet files".
3
Select "Every visit to the page", and then click the [OK] button.
On Netscape Navigator
1
On the "Edit" menu, click "Preferences".
2
In the "Category" box, click "Advanced", then "Cache".
3
Under "Compare the page in the cache to the page on the network",
select "Every time I view the page".
11-42
Various settings
CS175 (Phase3)
Advertisement
Table of Contents
