Oce CS175 Phase 3 User Manual page 137

Setting up the PCL driver
Note
If the paper size is other than the custom size, select the desired settings
after specifying the settings in Custom Size.
When "W" is selected for each standard paper size in the printer driver,
the data can be centered and printed.
For example, if A4 size data is created and you want to center and print
on A3 size paper, specify "A4 W" as the paper size in the printer driver
and specify "Tray 1" or "Bypass Tray" as the paper source.
To print, load A3 size paper in the tray ("Tray 1" or "Bypass Tray") of this
machine that is specified in the printer driver, and then specify the
settings described below from [Basic Screen (Paper)] — [Change Tray
Settings] — [Oversized Paper] on the control panel.
Select [A4W].
Enter the A3 paper size (420.0 × 297.0) in [Change Size].
CS175 (Phase3)
6
6-9