Table of Contents
Advertisement
11
Item
IPX Setting
Ethernet Frame Type
NetWare Print Mode
Print Server Name
Print Server Password
Polling Interval
Bindery/NDS Setting
File Server Name
NDS Context Name
NDS Tree Name
Printer Name
Printer Number
User Authentication Setting
Reminder
To apply any changes to the settings for "IPX Setting", "Ethernet Frame
Type", "NetWare Print Mode", "Print Server Name", "Polling Interval",
"Printer Name", and "Printer Number", which are marked with an
asterisk, restart this machine (turn the main power off, then on again).
When turning the power off, then on again, be sure to turn the sub-power
switch off first, then the main power switch. In addition, wait at least 10
seconds before turning the power on again; otherwise, this machine may
not function properly.
11-110
Description
Specify whether to enable NetWare.
Select the frame type.
Select "Pserver" or "Nprinter/Rprinter" as the operation mode
of the print server.
Enter the print server name (up to 63 characters, excluding / \ :
; , * [ ] < > | + = ? .).
Specify the print server password (up to 63 characters).
Enter the print queue scan rate (input range: 1—65535 sec-
onds).
Select from "NDS" and "NDS/Bindery Setting".
Enter the preferred file server name of bindery (up to 47 charac-
ters, excluding / \ : ; , * [ ] < > | + = ? .).
Enter the preferred NDS context name (up to 191 characters,
excluding / \ : ; , * [ ] < > | + = ? .).
Enter the preferred NDS tree name (up to 63 characters, ex-
cluding / \ : ; , * [ ] < > | + = ? .).
Enter the NPrinter/RPrinter printer name (up to 63 characters,
excluding / \ : ; , * [ ] < > | + = ? .).
Enter the NPrinter/RPrinter printer number (input range: 0—
255).
Specify whether to perform user authentication with a NetWare
connection.
Various settings
CS175 (Phase3)
Advertisement
Table of Contents
