Spool Setting - Oce CS175 Phase 3 User Manual

11

Spool setting

You can set whether or not a spool is used. (Default setting: ON)
1
On the Utility Setting screen, touch [6 Printer Setting].
– For details on displaying the Utility Setting screen, refer to "To
display the utility setting screen" on page 11-3.
2
Touch [1 Basic Setting].
3
Touch [Spool Print Jobs in HDD before RIP].
4
Touch the button for the desired setting.
– ON: When the next job is received while processing a job, the print
data is stored in the HDD.
OFF: The print data is not stored in the HDD.
Note
Be sure not to change the setting to "OFF". Printing may not be possible.
11-8
Various settings
CS175 (Phase3)