Oce CS175 Phase 3 User Manual page 54

4
4
Specify "Manual Input" under "IP Address Setting Method".
5
Specify settings for the following:
IP Address: Set the IP address of this machine.
Subnet Mask: Set the subnet mask for the network to which you are
connecting.
Default Gateway: Set the default gateway address for the network to
which you are connecting.
6
Touch [OK].
7
To apply the settings, restart this machine (turn it off, then on again).
– When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.
Turn this machine back on to apply the IP address.
4-10
Setting up network printing
CS175 (Phase3)