Oce CS175 Phase 3 User Manual page 190

6
Note
To automatically set the installed options, enter the printer name or IP
address of this machine in the "Printer Name or IP Address" box under
"Option Information", and then click the [Gather Option Information]
button.
The [Gather Option Information] button can only be used when the SNMP
setting is enabled on this machine and the SNMP v1/v2c (IP) setting
check box is selected.
When the Mail Bin Kit is installed, you can assign output tray 1 and output
tray 2 as mail bins.
To assign the output destination of the mail bins, select "Bin Setting"
from "Administrator Setting" - "System Setting" - "Output Setting" on the
control panel.
If "Printer" is displayed when specifying the output destination in the
printer driver, the mail bin that is selected is shown in the figure.
6-62
Setting up the PCL driver
CS175 (Phase3)