Table of Contents
Advertisement
Setting up network printing
6
In administrator mode of Web Connection, select "NetWare Setting"
from the network tab, and then specify the following settings.
IPX Setting: Select "ON".
Ethernet Frame Type: Select "Auto Detect". (Select the frame type
according to the network environment.)
NetWare Print Mode: Select "Nprinter/Rprinter".
Printer Name: Specify the printer name.
Printer Number: Specify the printer number (0-255). When 255 is
specified, the setting is "Auto Detect".
7
Restart this machine (turn the main power off, then on again).
–
When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.
8
Use the NetWare server console to load PSERVER.NLM.
CS175 (Phase3)
4
4-33
Advertisement
Table of Contents
