Table of Contents
Advertisement
Setting up the PCL driver
10
To set the time when the fax is to be sent, select the "Timer Send"
check box, and then specify the time that you want the fax to be sent
in the "Send Time" boxes.
–
By clicking the [Reflect Current Time] button, the current time set
on the computer is displayed in the "Send Time" boxes.
–
When using "Timer Send", check that the time set on the computer
is synchronized with the time on this machine. If the transmission
time is earlier than the current time of this machine, the fax is sent
the next day.
11
When transmitting a confidential fax, select the "Sub-Address" and
"Send ID" check boxes, and then enter the sub address and
transmission ID. It is possible to send confidential communications to
another fax model using F codes.
–
Up to 20 characters (numbers 0 through 9) can be entered in the
"Sub Address" text box.
–
Up to 20 characters (numbers 0 through 9, # and *) can be entered
in the "Send ID" text box.
12
Click the [OK] button.
The Printing Preferences dialog box appears again.
13
Specify the fax destination.
You can directly enter the fax recipient or you can select one from the
Phonebook.
To enter the fax recipient directly, continue with step 14. To select a fax
recipient from the Phonebook, skip to step 15.
CS175 (Phase3)
6
6-47
Advertisement
Table of Contents
