Oce CS175 Phase 3 User Manual page 398

Print operations

Hide thumbs Also See for CS175 Phase 3:

Table of Contents

When allowing (not allowing) a single IP address, the three methods

described below can be specified.

Enter the IP address in the start address and enter 0.0.0.0 in the end

address. (For example, "192.168.11.22 – 0.0.0.0").

Enter 0.0.0.0 in the start address and enter the IP address in the end

address. (For example, "0.0.0.0 – 192.168.11.22").

Enter the same IP address in the start address and the end address. (For

example, "192.168.11.22 – 192.168.11.22").

Various settings

CS175 (Phase3)