Hole-Punch - Oce CS175 Phase 3 User Manual

11

Hole-punch

You can specify the hole punching settings. (Default setting: OFF)
1
On the Utility Setting screen, touch [6 Printer Setting].
– For details on displaying the Utility Setting screen, refer to "To
display the utility setting screen" on page 11-3.
2
Touch [2 Paper Setting].
3
Touch [
4
Touch the button for the desired setting.
Note
The hole punch function is available only when optional finishers FS-514
and punch kit PK-510 are installed.
11-16
] or [ ], and then touch [Hole-Punch].
Various settings
CS175 (Phase3)